Fujitsu SRS-2100 manual Correcting Mistakes

SRS -2100 Local Features ( Chapter 3

ENTER DIRECTORY NUMBER (12)

8247629,99,,2502

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . .

ENTER NEXT CLEAR REGISTER

Note: If you try to exceed the 30- digit limit, the set refuses the input and the display remains unchanged.

4.Press ENTER (softkey 1). The associated LED turns green, and the word COMPLETED appears, remaining for 15 seconds:

ENTER DIRECTORY NUMBER (12)

942229876543

COMPLETED

ENTER NEXT CLEAR

REGISTER

5.Complete the procedure in one of these ways:

To return to the normal display, press REGISTER (softkey 4).

To program another one-touch number, press an unassigned multifunction button. (You can also press a currently assigned one-touch button to change or cancel its one-touch number.)

To return to the Service Mode main menu, press asterisk (*).

Correcting Mistakes

How you correct a mistake depends on where you are in the programming procedure:

∙Before pressing ENTER - to record the number, press CLEAR (softkey 3) to erase the number. Then enter the correct number.

∙After pressing ENTER - if the number on the COMPLETED screen is incorrect, press the multifunction button again.

The ENTER DIRECTORY NUMBER screen appears showing the incorrect number. Enter the correct number and then press ENTER. The correct number appears on the display as you enter it and replaces the incorrect number.

Changing or Canceling the Number Stored in a One- Touch Button

To change or cancel the one- touch number currently stored on

aone-touch button, follow these steps:

1.Press SERVICE, then REGISTER (softkey 4), 1, ENTER (softkey

1). This screen appears:

ONE-TOUCH SELECT ASSIGN KEY

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . .

Page 3-6