Fujitsu SRS-2100 manual SRS -2100 Voice Features Chapt er

SRS -2100 Voice Features ( Chapt er 2

or

c.Press DROP. ⎪(5ESS⎪

2.Dial the desired number by pressing the buttons on the numeric keypad.

3.If your call is not answered, you can:

a.Hang up by pressing the SPEAKER button.

or

b. Retrieve the original call, if it was held, by pressing its red- flashing Call Appearance button.

4.If your call is answered, converse with the called party. (If the MIC-OFF LED is red, the microphone has been turned off. Press MIC-OFF to turn it back on.)

You can turn off the microphone by pressing the MIC-OFF button; its LED will turn red. No sound will then be transmitted to the called party, allowing you to have a private conversation with others in the room. To turn the microphone back on, press MIC-OFF again; its red LED will go dark.

5.When the conversation is over, hang up by pressing the SPEAKER button. Note the displayed call duration; it vanishes after about three seconds.

or

Press DROP. ⎪(5ESS⎪

You may then pick up the call you were originally talking on, if it was held, by pressing its red- flashing Call Appearance button and then SPEAKER.

Note: Onhook dialing. In place

of steps 1 and 2, you can dial the number first and then press SPEAKER. The phone automatically dials the number. The numb er you enter remains available for dialing for about three minutes.

You can also use a one-touch button, after handling the existing call. This automatically selects handsfree operation on an idle CA and dials the number. Skip step 2.

(See also "Handsfree, Handset, and Headset Modes", in Chapter 3, "Local Features".)

Page 2-6