Fujitsu SRS-2100 manual KEY-ATTR Configuration, Download

Appendix B	( SRS -2100 Installation
KEY-ATTR Configuration	KEY ATTRIBUTE MODE – SELECT ITEM (1-
Before attempting to load or	2)
	1: DOWNLOADING		2: MANUAL
modify network data, obtain the	. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
current configuration from your	. . . . .
service provider. This	ENTER	NEXT	CLEAR
configuration information should	REGISTER
show the Directory Numbers/Call
Appearances, the features (with	You can either automatically
their feature numbers), and the
	download the configuration or
SRS-2100 button to which each
	set-up each item manually. Each
Directory Number/Call
	method is described in the
Appearance or feature is
	following sections.
assigned.
Button assignments fall into three	Download
categories: Directory Numbers,
Call Appearances, and Features.	Key Attribute Selection 1, may be
If you must manually configure
	used to request a download after
your set, or if you want to
	the initial installation.
rearrange the button assignments
on your set, you must use the	1. Press SERVICE, then REGISTER
following method. If you plan to
	(softkey 4), 10 ENTER to display
change a button assignment from
	the menu options. The screen
one category to another (e.g. Call
	looks like this:
Appearance to Directory Number)
you must first cancel the current	KEY ATTRIBUTE MODE			SELECT ITEM
assignment and add the new	(1-2)
assignment. For changes within a	1: DOWNLOADING		2: MANUAL
category (call forwarding to call	. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
pick-up), simply replace the old	. . . . .
data with the new data.	ENTER	NEXT	CLEAR
	REGISTER
To load, modify, or update your
set's network data, begin with	To automatically download the
these steps:	configuration, press 1, ENTER.
1. Press SERVICE, then REGISTER
(softkey 4), 10, ENTER (softkey
1). This screen appears:

Page B-9