Fujitsu SRS-2100 manual Handset Mode, Operating the Set with a Headset

SRS -2100 Local Features ( Chapter 3

Calls are connected and disconnected only by your pressing the SPEAKER button. In headset mode, the handsfree mode, including the speaker/microphone, is not supported.

Handset Mode

Enables normal use as a handset phone. While in this mode, the speaker can be enabled or disabled as follows:

Handsfree Supported - allows speaker use, controlled by SPEAKER button.

Handsfree Non Supported - disallows speaker use. The SPEAKER button is disabled. Picking up a call and hanging up on calls is by handset only.

Notes:

∙Some of the data entry displays have built -in timers. If you do not enter information within fifteen seconds, the display reverts to the menu for selecting the feature you were setting up. You must reselect the feature and start again.

∙If for any reason you become confused, you can always press REGISTER (softkey 4) to return to the menus and start over.

Operating the Set with a Headset

To operate the set with a headset, follow these steps:

1.Press REGISTER (softkey 4), 6, ENTER (softkey 1). This screen appears:

HAND-SET/HEAD-SET SERVICE MODE CURRENT MODE IS HAND-SET

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . .

ENTER NEXT CLEAR REGISTER

2.Press ENTER, and this screen appears:

SELECT ITEM (1-2)

1: HAND-SET MODE 2: HEAD-SET MODE

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . .

ENTER NEXT CLEAR REGISTER

3.Press 2. Line 2 changes to (SELECT=2).

4.Press ENTER. This screen appears:

HAND-SET/HEAD-SET SERVICE MODE CURRENT MODE IS HEAD-SET

COMPLETED

ENTER NEXT CLEAR REGISTER

Page 3-20