Fujitsu SRS-2100 manual If you are usi ng handsfree mode and want to use the handset

SRS -2100 Voice Features ( Chapt er 2

Switching Between Handset and Handsfree Modes

If you are using the handset and want to use handsfree mode

1.Press SPEAKER and then replace the handset in its cradle. You now hear the other parties through the speaker.

2.If the MIC-OFF LED is red, the microphone has been turned off. Press MIC-OFF to turn it back on (the LED goes dark). The microphone now picks up your voice.

3.You can turn off the microphone by pressing MIC-OFF, allowing you to hold a private conversation with others in the room. Pressing MIC-OFF again turns the microphone back on.

If you are usi ng handsfree mode and want to use the handset

Pick up the handset. Your call continues without interruption. The handsfree speaker and microphone are turned off. (You can turn off the microphone in the handset by pressing the MIC- OFF button while using the handset.)

Placing Handset Calls

If you are not talking on another call

1.Pick up the handset. This should automatically give you a dial tone, if not press an idle Call Appearance (CA).

∙If this connects you with a ringing call, follow the procedure described on page 2-4.

∙If you want to place the call from a Call Appearance other than the one automatically selected, press its CA button.

2.Dial the desired number by pressing the keys on the numeric keypad.

3.If your call is not answered, you can hang up as follows:

a.Replace the handset in its cradle.

or

b. Press the button in the handset cradle to get a dial tone.

or

c. Press DROP. ⎪(5ESS⎪

4.If your call is answered, converse with the called party.

Page 2-2