Appendix B | ( SRS |
1.Press 1 and ENTER. This screen appears:
CALL APPEARANCE REGISTRATION SELECT ASSIGN KEY
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . .
ENTER NEXT CLEAR REGISTER
The first button lower left, lights green. This is the factory default CA=1.
2.Press button 1.
3.Press CLEAR (softkey 3), ENTER (softkey 1). The green call button will extinguish.
This screen appears:
CALL APPEARANCE REGISTRATION CA=
COMPLETED
ENTER NEXT CLEAR REGISTER
Now that you have cleared CA=1 from your first call button, you are ready to program Directory Numbers.
If COMPLETED still appears on the display, press keypad *, 10, ENTER (softkey 1), 3, ENTER.
The set's indicators show button status as follows:
∙Green indicates a button already assigned to a Directory Number.
∙Red indicates a button already assigned to a network feature or to a local feature such as
∙Unlit indicates an unassigned button.
4.Press the button to which you want to assign the Directory Number.
You can press any unlit or green multifunction button. If you press a red button, the display shows the message INVALID SELECTION and the set waits for you to press a valid button.
∙If you press a green button, the display shows the current Directory Number assigned to that multifunction button. You can either enter a new Directory Number to replace the current number or cancel the current number.
∙If you press an unlit button, the screen looks like this:
DIRECTORY NUMBER MODE
DN=(XX)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . .
ENTER NEXT CLEAR REGISTER
