Chapter 3 | ( SRS |
1.Press SERVICE, then REGISTER (softkey 4), 7, ENTER (softkey
1). This screen appears:
RINGER SERVICE - SELECT ITEM
1: RINGER VOLUME 2: RINGER TONE
3: RINGING4: RINGER PATTERN
ENTER NEXT CLEAR REGISTER
2.Press 3, ENTER (softkey 1) again and this screen appears:
RINGING MODE CURRENT MODE IS BELL
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . .
ENTER NEXT CLEAR REGISTER
3.Press ENTER again and this menu appears:
SELECT ITEM | |
1: BELL | 2: SILENT |
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . .
ENTER NEXT CLEAR REGISTER
4.Select 1 for a normal ring or 2 for a silent ring and then press ENTER. The screen shows your selection plus the word
COMPLETED:
RINGING MODE
CURRENT MODE IS BELL
COMPLETED
ENTER NEXT CLEAR
REGISTER
5.To return to the normal display, press REGISTER (softkey 4).
To change another setting, you can press asterisk (*) to return to the Service Mode options.
Selecting Ringer Pattern
This selection determines the type of ring that announces an incoming call when you are conversing on another line.
1.Press SERVICE, then REGISTER (softkey 4), 7, ENTER (softkey
1). This screen appears:
RINGER SERVICE MODE - SELECT ITEM
1: RINGER VOLUME 2: RINGER TONE
3: RINGING |
| 4: RINGER |
PATTERN |
|
|
ENTER | NEXT | CLEAR |
REGISTER |
|
|
2.Press 4, ENTER. A screen appears showing you the current ringer pattern setting:
RINGER PATTERN MODE CURRENT MODE IS MUTE RING
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . .
ENTER NEXT CLEAR REGISTER
Page
