Fujitsu SRS-2100 manual Press Enter again to display the preference menu, Personal Directory

Chapter 3 ( SRS -2100 Local Features

∙Idle preference. The SRS-2100 selects a Call Appearance button that is idle, if one is available.

∙No preference. The SRS-2100 does not automatically select any Call Appearance button when you go offhook. You must press the button you wish to be connected to either before or after you go offhook.

∙Ringing line preference. The SRS-2100 selects the Call Appearance button that is ringing with an incoming call. If you have more than one incoming call, the SRS-2100 selects any ringing Intercom or Intercom Group feature button first, and then selects the button with the call that has been ringing the longest. You are immediately connected to the call.

If you have no incoming calls, the SRS-2100 selects the idle Call Appearance with the lowest button number and gives you a dial tone.

To select a Call Appearance preference, follow these steps:

1.Press REGISTER (softkey 4), 13, and ENTER (softkey 1). A screen appears showing you the current preference:

PREFERENCE SERVICE MODE CURRENT MODE IS PRIMARY

PREFERENCE

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . .

ENTER NEXT CLEAR REGISTER

2.Press ENTER again to display the preference menu:

SELECT ITEM (1-4)

1:RINGING PREFERENCE 2: IDLE PREFERENCE

3:PRIMARY PREFERENCE 4: NO PREFERENCE

ENTER NEXT CLEAR REGISTER

3.Press the number of the preference option you want and then press ENTER. A screen appears showing your selection and the message COMPLETED:

PREFERENCE SER VICE MODE

CURRENT MODE IS RINGING

PREFERENCE

COMPLETED

ENTER NEXT CLEAR

REGISTER

4.To return to normal operations, press REGISTER (softkey 4). The standard display screen appears.

PERSONAL DIRECTORY

Page 3-41