Gateway 960 manual Closing the server case, To close the server case

Replace the air duct if one came with your server.

For more stability, set the server case on its side.

Closing the server case

Closing the server case

To close the server case:

1

2 Make sure that all of the internal cables are arranged inside the case so they will not be pinched when you close the case.

3

4 Align the side panel’s top and bottom tabs into the case notches, then slide the side panel toward the back of the case until the back of the side panel is flush with the back of the case.

5 Tighten the three captive thumbscrews that secure the front of the cover to the server case.

Thumbscrews

6 Set the case upright.

www.gateway.com 45