Gateway 960 manual Replacing the Scsi backplane

Reconnect the power, SCSI, and manageability cables to the backplane.

Replacing the SCSI backplane

10 Slide the backplane up slightly, then lift it away from the hot-swap cage.

11 Place the new backplane onto the hot-swap cage, then tighten the thumbscrew.

12 Slide the hot-swap cage part-way into the hot-swap bay. Make sure that the side of the cage marked “Top” is oriented toward the top of the server case.

13

14 Slide the hot-swap cage all the way into the hot-swap bay, then tighten the four thumbscrews.

www.gateway.com 77