9 Place the jumper back onto pins 2-3.
10 Close the case by following the instructions in “Closing the server case” on page 45.
11 Turn on the server. A message appears saying that the CMOS Date and Time are not set.
Configuration jumper JP7
8 Remove the jumper across pins 2-3 of jumper JP7, then place the jumper across pins 1-2. The BIOS memory is cleared.
Pin 3
Pin 1 Pin 2
Resetting the BIOS
12 Press F1 to reset the BIOS to factory default settings.
Resetting BIOS passwords
To reset BIOS passwords, you must reset and clear all BIOS settings. To reset BIOS passwords, follow the instructions in “Resetting the BIOS” on page 90.
www.gateway.com | 91 |
