Installing HP Device Manager

Adding DHCP Option 60 and 201 to an ISC DHCP Server

Enter add optiondef 60 (name of your choice) STRING 0 then press the Enter key.

Enter set optionvalue 60 STRING PXEClient“ then press the Enter key.

To confirm that the settings are correct, enter show option- value all then press the Enter key.

3Add option 201, and set the value to

Management_Gateway_IP_Address’ ‘40003’

Type in add optiondef 201 (name of your choice) STRING 0 then press the Enter key.

Type in set optionvalue 201 STRING

Management_Gateway_IP_Address’ ‘40003’ then press the Enter key. (The Management_Gateway_IP_Address is the address of the server running the Management Gateway service.)

To confirm that the settings are correct, type in show option- value all then press the Enter key.

Note: When setting optionvalue 201, ‘Management_Gateway_ IP_Address’ ‘40003’ must be written exactly as shown above, including the single quotes and separated by a single space, otherwise errors will occur.

The DHCP server should then be ready to be used with PXE.

If ISC DHCP server 2.0 is in use, it must be updated to ISC DHCP server 3.0 as version 2.0 does not support vendor specific informa- tion. For more information, see HTTP://WWW.ISC.ORG.

32 Configuring DHCP Servers