Configuring Task Parameters

Using the HP Management Console

Select Tools > Configuration from the Console’s menu bar to open the Configuration Management dialog, then click the Task Parameters option in the option tree pane to expand it.

The Task Parameters option consists of two sub-options:Valid Time and Timeout and Write Filter Policy Setting. These are described in the following sections.

Valid Time and Timeout

The Valid Time and Timeout options enable you to set the duration HP Device Manager will wait for the execution of tasks. You can also specify the start and end time of working hours during which HP Device Manager will not execute tasks. Clicking in an option field will cause the Description box to display a short description of that option.

1Select Valid Time and Timeout in the option tree pane of the

Configuration Management dialog.

2Set the time, in minutes, for each category: Valid Time, General

Timeout, General Batch Interval, PXE Batch Interval and FTP Batch Interval.

Task Management

103