IBM SA38-0512-03 manual Services

Text-Based System Management				Services
The text-based Open				Firmware command line and System Management Services are
available if		an	ASCII	terminal is	attached to your system	unit.
To start the text-based System					Management Services instead	of the Open Firmware
command	line,	press 1		on the ASCII terminal keyboard when the keyboard text
symbol	appears		during	startup.

After the text-based System Management Services starts, the following screen appears.

Note: The	version		of firmware currently installed in your			system unit is displayed at
the	top	of	each	screen in	the text-based System	Management Services.
Please note			the version number; processor upgrades may require a specified
version		of	firmware	to be	installed in your system	unit. Update System
Firmware		is	an option under		the Utilities menu.

à	ð
	System Management Services

1	Display Configuration
2	Select Boot Devices
3	Utilities
4	Select Language
	.------.
	X=Exit
	------'
====>
á	ñ
Figure	7-1. Text-based System Management Services - Main Menu (Model 140 and Model 240)

7-267043 43P Series Service Guide