IBM SA38-0512-03 manual Failing FRU Description, Eeprom problem resolution

Table	4-1	(Page 8 of 11).			Firmware Error Codes
Error	Code	Function	/		Repair Action/Possible		Failing FRU
		Description
25A80998		NVRAMRC	script		Execution	of a	command line within	the nvram
		evaluation		error	- configuration variable “nvramrc” (script) resulted in a
		command	line		“throw”	being	executed. This script can be		modified by
		execution		error	the system firmwareSMS utilities, the operating
					system,	PCI adapter rom code or		utility, or	an	operator
					(via the open firmware script editing command
					“nvedit”). It may not be possible to resolve the
					problem without		a detailed analysis of the		nvram	script,
					the current system configuration, and device tree
					contents.

1.The problem can be caused by a SCSI adapter,whose SCSI bus ID has been changed

from the default setting, no longer appearing in the system. This can be caused either by removing a

SCSI adapter,	or a	problem with	a SCSI adapter.
a. Select the	“SCSI	ID” utilitySMS	from the
menu(s).

1)Verify the list of SCSI controllers/adapters. If the list is not correct, suspect a problem

with the adapter(s) installed but not listed.

2)Select the option to “Save” the configuration information.

3)Restart the system.

b. If the problem persists, boot the operating system and verify the SCSI bus IDs of any installed/available SCSI controllers (change as necessary), and restart the system.

2.Contact your service support representative for further assistance.

EEPROM problems

EEPROM problem resolution:

1. Ensure that the EEPROM Security jumper is in the correct position if doing a PAP install.

2.Retry the operation.

3.If retries do not solve the problem, replace the System Planar.

25AA0000	Unable to	unlock	Refer	to	EEPROM	problem	resolution	above
	eeprom
25AA0001	Read-Recv	error	Refer	to	EEPROM	problem	resolution	above
25AA0002	Read-Trans	error	Refer	to	EEPROM	problem	resolution	above
25AA0003	Write-enable error		Refer	to	EEPROM	problem	resolution	above
25AA0004	Write-recv	error	Refer	to	EEPROM	problem	resolution	above
25AA0005	Write-disable errorRefer to EEPROM problem resolution above
25AA0006	Write-Trans	error	Refer	to	EEPROM	problem	resolution	above

4-87043 43P Series Service Guide