6. All of | the | latches attaching the front bezel | to the | chassis | are | now | accessi |
inside | the | front of the system unit. Release | these | latches | and | pull | the fro |
away | from | the chassis. |
|
|
|
|
|
7.To remove the power switch, remove the two screws which secure it to the chassis, then disconnect the power switch cable from the system board.
Replacement
1. Connect the power switch cable to the system board.
2. Fasten the power switch to the chassis with the two mounting screws.
3.Slide the front bezel onto the front of the chassis until the latches are mounted.
4.Slide the media drive bracket assembly towards the front of the chassis and position.
5.Secure the media drive bracket assembly to the side of the chassis with t mounting screw.
6. Connect the media fan cable to the system board.
7.Install the media fan assembly.
8.Install the front fan and speaker assembly as described on “Fan and Speaker Assembly” on page
9.Replace the system unit covers as described in “Cover” on page
