The Config icon allows you to configure

network

adapters

which require setup.

Selecting

the

Config icon

presents a

list

of the adapters requiring configuration. Use

the arrow keys or mouse to highlight an

adapter, press the spacebar to select the

adapter,

then

highlight

the OK icon

and

press

the Enter

key.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The next screen allows you

to select

the type of adapter you have just chosen (or

allow the system to select the

type

automatically). Use the arrow keys or mouse to

highlight a selection. To choose

the

highlighted selection, press the spacebar, then

highlight the OK icon and press

the

Enter

key.

 

 

After

choosing

the

adapter

to

configure,

you can select the

communications

mode of

the chosen adapter (or allow the system to select the communications mode

 

automatically). As on the previous

screen, use the arrow keys

or mouse to

highlight,

then press the spacebar to select.

When

you have selected the communications

mode,

highlight

the

OK icon

and

press

the

Enter key.

 

 

7-227043 43P Series Service Guide

Page 174
Image 174
IBM SA38-0512-03 manual 227043 43P Series Service Guide