Step
1.Turn the power off.
2.Reconnect the system console.
Notes: |
|
|
|
|
|
|
|
|
|
a. If an | ASCII | terminal has | been | defined | as | the | system console, attach | the | |
ASCII terminal cable to the S1 connector | on the rear of the system unit. Also | ||||||||
connect | the internal | serial | and | Ethernet | cables to the system board. |
| |||
b. If a display attached to a display | adapter has been defined as the system | ||||||||
console, install the display adapter and | connect | the display to it. Plug | the | ||||||
keyboard into | the | keyboard | connector on | the | rear of the system unit. |
| |||
3.Turn the power on.
4.If the ASCII terminal or graphics display (including display adapter) are connected differently than before, the Console Selection screen appears and
requires that a new console be selected.
5.When the keyboard indicator is displayed, press the F1 key on the directly
attached keyboard or the number 1 key on an ASCII terminal. This triggers the SMS.
6. Enter the appropriate password when prompted to do so.
7. Wait until the SMS screen is displayed or the system appears to stop.
