IBM SA38-0512-03 manual Symptom, To be a Display, Etc

Symptom Action

The system stops and an 8-digit error Recordcode the error code. If you are working on a starting with the number "2" is displayedModel. 140 or Model 240, go to “Firmware Error

Codes” on page 3-4. If you are working on a

Model 150, go to “Error Codes” on page 4-1.

The system stops and a 4-digit number Go to “MAP 1540: Minimum Configuration” on beginning with the characters "FF" is displayedpage2-21.

in the operator panel display.

The system stops and a 4digit number Record the code. Go to “Firmware Checkpoints” beginning with the character "E" is displayedonpage 4-in13.

the operator panel display.

The system stops and a 4digit number

Recordnot SRN 101xxx,

where xxx is the last three

beginning with

neither

the

characters

digits"FF"or of"E"

the

fourdigit

number

displayed,

then go

is displayed

in

the operator panel displaytothe. "Fast Path

MAP" Diagnosticsthe

Information for Multiple Bus. Systems

Note:

If the operator panel displays 2 sets of

numbers,

use

the bottom set of numbers

as

the

error

code.

The system

stops

and

a 3-digit

number Ifis

the

number

displayed

begins

with

the

displayed

in

the

operator

panel

displaycharacter.

"F"

then

go to

“Firmware Checkpoints”

on

page 3-14.

If

the

number

is

000, 185, or 888, go

to

“MAP

1540:

Minimum

Configuration”

on page 2-21.

Record SRN 101-xxx, where xxx is the 3-digit number displayed in the operator panel display, then go to the "Fast Path MAP" in the Diagnostics Information for Multiple Bus

Systems .

888 is displayed in the		control	panel fGollowedtotheby Fast	Path MAP Diagnosticsin the
additional error	codes.		Information for Multiple Bus. Systems
There Appears	to be a	Display	Problem (Blank, Distortion, Blurring,	Etc.)

Chapter 2. Maintenance Analysis Procedures 2-3(MAPs)