IBM SA38-0512-03 manual Xxx=000 Initialization Failed, device test failed

Table	3-2	(Page 6 of 9).	Firmware Error Codes.
Error	Code	Description	Action/
			Possible Failing FRU
xxx=000		Initialization	failed, device test failed

001init-nvram invoked, ALL of NVRAM initialized

002init-nvram invoked, GE area preserved, remaining areas initialized.

011Data corruption detected, ALL of NVRAM initialized

012Data corruption detected, GE area preserved, remaining areas initialized

100	NVRAM data	validation check failedTurn.	off, turn on system unit and retry
		the	operation.
25AA0xxx	EEPROM	Note:	Ensure		that		the		EEPROM
			Security jumper is in the correct
			position			if	doing		a
			priviliged-access						password
			install.
		Consult the system's User's Guide for
		jumper		location		and		position.
		Retry		the	operation.
		If retries do not solve the problem,
		replace		the	system			board.
xxx=000	Unable to	unlock EEPROM

001Read-Recv error

002Read-Trans error

003	Write-enable error
004	Write-recv error

005Write-disable error

006Write-Trans error

007Unable to lock EEPROM

25Cyyxxx

Memory

Chapter 3. Error Code to FRU Index for Model 1403-9and Model 240