Media Fan

Removal

1. If

you have not already done so, remove the covers as described in “Cover” on

page

8-3.

2. Disconnect the media fan power cable.

3.

Loosen

the

three

screws which secure the media fan assembly to the side of the

media

drive

bracket.

4.

Remove

the

media

fan assembly.

Replacement

1. Place

the media

fan

assembly

into

position.

 

2.

Secure

the

media

fan

assembly

to

the

side of

the media drive bracket with the

three

screws

removed

earlier.

 

 

 

 

3.

Connect

the

media

fan

power cable

to

the system

board.

8-127043 43P Series Service Guide

Page 208
Image 208
IBM SA38-0512-03 manual Media Fan Removal