Chapter

2.

Maintenance Analysis Procedures (MAPs)

This

chapter

contains

Maintenance Analysis Procedures (MAPs) for the Model 140,

Model

150,

and

Model

240.

Entry MAP

Notes:

1.When possible, run Online Diagnostics in Service Mode. Online Diagnostics perform additional functions, compared to Standalone Diagnostics. This ensures that the error state of the system is captured in NVRAM for your use in f

problem.

The

AIX error log and SMIT are only available when diagnostics are

run from

the

hard drive.

2.Licensed programs frequently rely on either network configuration, vital product data (VPD) stored on the operator panel control assembly, or system board information to authorize program use. If the MAPs indicate that the network adapter, operator panel, or system board should be replaced, notify the sys

owner that new keys for licensed programs may be required.

3. If

a network

adapter

or

the

system board is

replaced, the network

administ

must be notified so that the client

IP addresses used by the server can

changed. In addition, the operating system configuration of the network

 

controller may need to be changed in

order to enable system startup, and any

client

or server

that

addresses

this

system should be updated. After

completi

the recommended

actions

in

this

chapter,"MAP 0410:goRepairto

Checkout" in

 

theDiagnostics

Information for Multiple

Bus.

Systems

 

 

Chapter 2. Maintenance Analysis Procedures 2-1(MAPs)

Page 37
Image 37
IBM SA38-0512-03 manual Maintenance Analysis Procedures MAPs, Entry MAP