5.Push down the latches on the processor card connector to release the process card, and lift the card straight up and out of the system unit.

Replacement

Replace

in

reverse

order.

 

 

Note: If

more

than

one processor card is installed, both

must be of

the same s

and

type.

 

 

 

 

Notes:

 

 

 

 

 

 

1. Do not

push

on

the heatsink while installing or removing

a processor

card. This

could

damage

the processor.

 

 

2.Make sure to push down on the processor card until the latch tabs lock the processor card in place.

Chapter 8. Removal and Replacement Procedures8-25

Page 221
Image 221
IBM SA38-0512-03 manual Removal and Replacement Procedures8-25