IBM SA38-0512-03 manual Model 140 only, FF2 FF3

Step 1540A-7 (Model 140 only)

1.Turn the power off.

2.Install the L2 cache card.

Does	the operator			panel	do	one	of the	following:
Ÿ	Stop	with	any	code	other		than
	–	FDC,	FF2,	FF3,	or	F4D	(Model	140)

ŸAlternate between

– FFD and any other code (Model 140)

NOThe system board or L2 cache card is defective.

1. Replace the L2 cache card and repeat this step.

2.Replace the system board and install the original L2 cache card and repeat this step.

3. Replace the L2 cache card and repeat this step.

4.If the symptom did not change and both the system board and L2 cache card have been replaced, call your service support person for assistance.

See notes on 2-1 regarding system board replacement.

YES Go to “Step 1540A-8” on page 2-29.

2-287043 43P Series Service Guide