IBM SA38-0512-03 manual Maintenance Analysis Procedures 2-33MAPs

Step 1540A-11

The	system	is working	correctly with this configuration. One of the FRUs (adapte
that	you	removed is	probably defective,

1.Turn the power off.

2.Install a FRU (adapter) and connect any cables and devices, if any, that w attached to it.

3.Turn the power on.

4. Make sure the diagnostic CD-ROM disc is inserted into the CD-ROM drive.

5. If the Console Selection screen is displayed, choose the system console.

6. After the keyboard indicator is displayed, press the F5 key on the directly-attached keyboard or the number 5 key on an ASCII terminal keyboard.

7. Enter the appropriate password when prompted to do so.

Is the "Please define the System Console" screen displayed?

NOGo to “Step 1540A-12” on page 2-34.

YES Repeat this step until all of the FRUs (adapters) are installed, then g theRepair Checkout Procedurein theDiagnostics Information for Multiple

Bus Systems.

Chapter 2. Maintenance Analysis Procedures 2-33(MAPs)