Intel ZT 7102 manual ChassisManagementApi Threshold Response Format, 109

Intel® NetStructureTMZT 7102 Chassis Management Module

RPC

Table 45. Error and Return Codes for the RPC Interface (Sheet 4 of 4)

Code #:	Error Code String	Error Code Description
100	E_SNMP_CMD_UNSUPPORTED	Internal CMM Error
101	E_SNMP_ERROR	Internal CMM Error
102	E_SNSR_VALUE_OUT_OF_RANGE	Internal CMM Error
103	E_SNSR_AUTH_ERROR	Internal CMM Error
104	E_WP_INITIALIZE_LIBS	Internal CMM Error
105	E_WP_CFG_READ_ERROR	CMM config file may be corrupted
106	E_WP_CFG_WRITE_ERROR	CMM config file may be corrupted
107	E_WP_THRESHOLD_UNSUPPORTED	The sensor being queried doesn't support a
		particular threshold.
108		The sensor doesn't support a "current”
	E_WP_INVALID_TARGET	value. This happens when querying a
		current value on a discrete sensor type.
109	E_WP_INVALID_LOCATION	Not a valid -l location
110	E_WP_INVALID_DATA_ITEM	Not a valid -d parameter
111	E_WP_INVALID_SET_DATA	Not a valid -v parameter
112	E_WP_CMD_UNSUPPORTED	Not a supported command
113	E_WP_STANDBY_CMM	Can't execute this command on the
		standby CMM.
114	E_WP_I2C_ERROR	Internal CMM Error
115	E_FT_SEM_GET_FAILURE	Internal CMM Error
116	E_DRONE_NOT_FOUND	Internal CMM Error
117	E_INTERNAL_ERROR	Internal CMM Error
118	E_BPM_PWR_SUPPLY_NOT_PRESENT	Power Supply Not Present Error
119	E_NEM_INTERNAL_FAILURE	Internal CMM Error
120	E_WP_CMM_RESET	Internal CMM Error
121	E_UPDATE_INPROGRESS	Update in Progress
122	E_MSGQ_START	Initilization message

Note: Error codes 100 and 101 will never be returned by the CMM when using RPC. If you receive these error codes, they are most likely being returned by the RPC client. Consult your RPC client documentation or code to find the description of these errors.

20.2.3ChassisManagementApi() Threshold Response Format

The following table documents the format of ChassisManagementApi() queries that return data of type DATA_TYPE_ALL_THRESHOLDS.

Technical Product Specification 109