Intel® NetStructure™ ZT 7102 Chassis Management Module
Contents
| 2.16 | Telco Alarm Signal | 34 | |
|
| 2.16.1 | Alarm Relays | 34 |
|
| 2.16.2 | Opto Inputs | 34 |
| 2.17 | Real Time Clock | 34 | |
| 2.18 | Network Time Synchronization | 34 | |
| 2.19 | Watchdog Timer | 35 | |
| 2.20 | Battery Backup | 35 | |
|
| 2.20.1 | Replacing the Battery | 35 |
| 2.21 | Running Your System Without A CMM | 36 | |
3.0 | Software Specifications | 37 | ||
| 3.1 | Operating System | 37 | |
| 3.2 | Command Line Interface (CLI) | 37 | |
| 3.3 | SNMP/UDP | 37 | |
| 3.4 | Remote Procedure Call (RPC) Interface | 37 | |
| 3.5 | Ethernet Interfaces | 37 | |
| 3.6 | Sensor Event Logs (SEL) | 38 | |
|
| 3.6.1 | CMM SEL Architecture | 38 |
|
| 3.6.2 | Satellite Management Controller (SMC) Boards | 38 |
|
| 3.6.3 | Baseboard Management Controller (BMC) Boards | 38 |
|
| 3.6.4 | Retrieving a SEL | 38 |
4.0 CMM Redundancy, Synchronization and Failover | 39 | |||
| 4.1 | Overview | 39 | |
| 4.2 | Hardware Redundancy Specification | 39 | |
| 4.3 | Synchronization | 39 | |
|
| 4.3.1 | Synchronization Requirements | 40 |
| 4.4 | CMM Failover | 41 | |
|
| 4.4.1 | Scenarios That Force a Failover | 41 |
|
| 4.4.2 | Scenarios That Prevent Failover | 41 |
|
| 4.4.3 | Scenarios That Failover to a Healthier Standby CMM | 41 |
|
| 4.4.4 | Scenarios That Failover to an Equally Healthy CMM | 42 |
|
| 4.4.5 | Failover Timing | 42 |
|
| 4.4.6 | Manual Failover | 42 |
5.0 CMM Installation and Removal | 43 | |||
| 5.1 | Unpacking | 43 | |
| 5.2 | Connectivity | 43 | |
| 5.3 | Installing the CMM | 43 | |
| 5.4 | Removing the CMM | 44 | |
6.0 | ............................................................................................................................... | 47 | ||
| 6.1 | BIST Test Flow | 47 | |
| 6.2 | 48 | ||
| 6.3 | 48 | ||
| 6.4 | 48 | ||
| 6.5 | 49 | ||
| 6.6 | Event Log Area and Event Management | 49 | |
| 6.7 | OS Flash Corruption Detection and Recovery Design | 50 | |
|
| 6.7.1 | Monitoring the Static Images | 50 |
|
| 6.7.2 | Monitoring the Dynamic Images | 50 |
4 | Technical Product Specification |