Intel ZT 7102 Dataitem -d Keywords for All Locations Sheet 2, Data Item Description Get Valid Set

Intel® NetStructureTMZT 7102 Chassis Management Module

Command Line Interface (CLI) Syntax and Arguments

Table 23. dataitem (-d) Keywords for All Locations (Sheet 2 of 2)

Data Item	Description	Get/	Valid Set
		Set	Values:
	All thresholds of a sensor. This includes lower
thresholdsall	non-recoverable, lower critical, lower non-critical, upper	Get	N/A
	non-critical, upper critical, and upper non-recoverable.
uppercritical
uppernoncritical
lowercritical	Used to query individual thresholds for a value based	Get	N/A
lowernoncritical	sensor, such as temperature or voltage.
uppernonrecoverable
lowernonrecoverable
eventaction	Used to trigger a script based on event code of a health	Set	The event code
	event. Refer to Section 18.0, “CMM Scripting” on page 93		of the event

Table 24. dataitem (-d) Keywords for System location

Data Item	Description	Get/	Valid Set
		Set	Values
	Output:
	Critical: CritList
	Major: MajList
unhealthylocations	Minor: MinList	Get	N/A
	where each list is a list of locations having that level of
	health events (space separated).
	In the output, PSn refers to PowerSupplyN (i.e., PS1 =
	PowerSupply1, PS2 = PowerSupply2, etc.)

Table 25. dataitem (-d) Keywords for BladeN Locations

Data Item	Description	Get/	Valid Set Values:
		Set
	Used to add IPMI capable drone mode compatible		1 - Add board to
			drone mode list
	blades to the list of recognized drone mode boards. For
ignorespcirst		Set	0 - Delete board
	further information on drone mode see Section 14.0,
			from drone mode
	“Drone Mode SBC Support” on page 85.
			list
			poweron
	Used to query or control the power state of a board. This		poweroff
powerstate		Both	reset
	is also used to reset a board.
			offline
			activate

Technical Product Specification 59