Intel ZT 7102 manual Snmp Trap Event Syntax, CMM Sensor Targets, Sensor Target Description

Intel® NetStructureTMZT 7102 Chassis Management Module

Health Event Strings

11.1.3SNMP Trap Event Syntax

The following is the syntax of each SNMP trap for an associated event:

Time : [TimeStamp] , Location : [ChassisLocation] , Chassis Serial # :

[ChassisSN] , Board : [Location] , Sensor : [SDR Sensor Name] , Event :

[Health Event String]

•Timestamp is in the format: [Day] [Month] [Date] [HH:MM:SS] [Year]. For example, Thu Dec 11 22:20:03 2003

•ChassisLocation is the chassis location information recorded in the chassis FRU.

•ChassisSN is the chassis serial number recorde in the chassis FRU.

•Location is the location where the sensor generating the event is located (i.e., CMM)

•SDR Sensor Name is the name given to the sensor in the Sensor Data Record (SDR).

•Health Event Strings are listed in Section 11.4, “List of Possible Health Event Strings” on page 70.

11.2Sensor Targets

Available sensors for a location can be retrieved with the listtargets dataitem argument of the cmmget command. To view a list of sensor targets on the cmm using the listtargets command:

cmmget -l cmm -d listtargets

The CMM lists the following sensors that can be queried for health events:

Table 28. CMM Sensor Targets

Sensor Target	Description
Brd Temp	Board Temperature Sensor
+1.5V	+1.5 Volt Sensor
+2.5V	+2.5 Volt Sensor
+3.3V	+3.3 Volt Sensor
+5V	+5 Volt Sensor
Eth0 Interface	Eth0 LAN Sensor
Eth1 Interface	Eth1 LAN Sensor
Eth1:1 Interface	Eth1:1 LAN Sensor
TASensor1	Telco Alarm Input Sensor 1
TASensor2	Telco Alarm Input Sensor 2
BIST	Built-in Self Test Sensor Type

For complete lists of sensors on other components (i.e., voltage sensors on blade1), refer to the corresponding Technical Product Specification for that product.

68 Technical Product Specification