Intel® NetStructureTMZT 7102 Chassis Management Module
Health Event Strings
Table 36. Slot Event Strings (Slot N Event)
Event String | Event Code | Event Severity |
|
|
|
"Blade Removed" | 192 | OK |
|
|
|
“Blade Presence Detected” | 193 | OK |
|
|
|
"Blade Deasserted HEALTHY#" | 194 | OK |
|
|
|
"Blade Asserted HEALTHY#" | 195 | OK |
|
|
|
“Blade Failed HEALTHY# After Maximum Attempts” | 196 | OK |
|
|
|
“Blade Powered On” | 197 | OK |
|
|
|
“Blade Powered Off” | 198 | OK |
|
|
|
“Blade Reset” | 199 | OK |
|
|
|
“Blade set to Offline” | 200 | OK |
|
|
|
“Blade set to Active” | 201 | OK |
|
|
|
“Blade is not IPMI capable” | 202 | OK |
|
|
|
"Blade is IPMI capable" | 203 | OK |
|
|
|
Table 37. CMM Redundancy Event Strings (CMM [1-2] Redundancy)
Event String | Event Code | Event Severity | |
|
|
| |
"Regained" | 208 | OK | |
|
|
| |
"Established" | 209 | OK | |
|
|
| |
"Lost due to switch failure" | 210 | Major | |
|
|
| |
"Lost due to unhealthy signal" | 211 | Major | |
|
|
| |
"Lost due to failed network connectivity between the CMM and the | 212 | Major | |
Primary SNMP trap destination (SNMPTrapAddress1)." | |||
|
| ||
|
|
| |
"Lost due to CMM removal" | 213 | Major | |
|
|
| |
"Lost due to CMM reboot" | 214 | Major | |
|
|
| |
"Lost due to critical event on the CMM" | 215 | Major | |
|
|
| |
"Lost due to inability to communicate with the other CMM over its | 216 | Major | |
management bus." | |||
|
| ||
|
|
| |
"Lost due to incompatible firmware versions on the CMMs. Please | 239 | Major | |
upgrade the CMMs to the same version." | |||
|
| ||
|
|
|
Table 38. CMM Failover Event Strings (CMM Failover)
Event String | Event Code | Event Severity | |
|
|
| |
"Failover occurred." | 217 | OK | |
|
|
| |
"Failover occurred because of switch failure." | 218 | OK | |
|
|
| |
"Failover occurred because of failed network connectivity between | 219 | OK | |
the CMM and the Primary SNMP trap destination." | |||
|
| ||
|
|
| |
"Failover occurred because of critical CMM health events." | 220 | OK | |
|
|
| |
"Failover occurred because of a bad hardware signal from the other | 221 | OK | |
CMM." | |||
|
| ||
|
|
| |
"Failover occurred because it was forced by the user." | 222 | OK | |
|
|
|
74 | Technical Product Specification |
