Intel ZT 7102 manual Example CLI Commands Sheet 2, 140

Intel® NetStructureTMZT 7102 Chassis Management Module

Example CLI Commands

Table 55. Example CLI Commands (Sheet 2 of 2)

Use Case	CLI Command	Return
Get a blade’s FRU	cmmget –l blade[1-19]–d fru	A list of FRU information.
information
Find out what sensors	cmmget –l blade3 –d listtargets	A list of sensor names as defined in
are on blade 3.		their SDRs on blade 3.
List the data items that
can be queried or set	cmmget –l blade4 –d listdataitems	A list of dataitems for blade 4.
on blade 4.
Find out what can be		A list of commands to be used as
queried on blade4’s	cmmget –l blade4 –t “+3.3V” –d listdataitems
		dataitems for the +3.3V.
+3. 3V sensor.
Enable SNMP Traps	cmmset –l cmm –d snmpenable –v enable	Success or failure
Set SNMP Trap	cmmset –l cmm –d snmptrapaddress1 –v	Success or failure
Address1	134.134.100.34
Set SNMP	cmmset –l cmm –d snmpcommunity –v public	Success or failure
Community

140 Technical Product Specification