Intel ZT 7102 manual Value Parameter, Sample CLI Operations

Intel® NetStructureTMZT 7102 Chassis Management Module

Command Line Interface (CLI) Syntax and Arguments

Table 27. dataitem (-d) Keywords for CMM Location (Sheet 2 of 2)

Data Item	Description	Get/	Valid Set
		Set	Values:
	Used only from the active CMM to failover to the standby
failover	CMM. This command will only successfully execute if	Set	1 - Failover
	the standby CMM is in a healthy enough state to accept
	a failover.
	Used to query CMM redundancy information. Indicates
redundancy	CMM(s) presence, which CMM is active, which CMM is	Get	N/A
	stand by, and which one the user is logged into.
version	The version of the CMM software.	Get	N/A
			Valid SNMP
snmptrapcommunity	Set or query the SNMP trap community string.	Both	community
			name:
			public (default)
			Enable
snmpenable	Sets or queries the SNMP trap enabled status.	Both	(default)
			Disable
	The IP address of the machines receiving SNMP traps		IP Address in
snmptrapaddress[1..5]		Both	the form:
	from the CMM.
			x.x.x.x
			Valid port
snmptrapport	Sets or queries the TCP/IP port that the SNMP trap will	Both	number:
	be sent from.		0-65536
			162 (default)
snmptrapversion	Sets or queries the SNMP trap version.	Both	V1(default)
			V3
	Used with the cmmget command to update the CMM
	firmware on the CMM.		Starts the
update	The syntax of the command is: cmmset -l cmm -d update	Set	update of the
	-v [Update Package path and filename] [force]		firmware on
	[overwrite] [ftp:server:user:password]		that CMM.
	Refer toChapter 25.0, “Updating Software”for more info.

8.6Value Parameter: -v

The Value parameter specifies the new value for a Dataitem. This parameter is required for all cmmset commands and is only used for cmmset commands. Valid value parameters are shown in with their corresponding data items in the data item tables listed above.

8.7Sample CLI Operations

Sample CLI Operations can be found in Appendix D, “Example CLI Commands”.

Technical Product Specification 61