
Intel® NetStructureTMZT 7102 Chassis Management Module
Obtaining FRU Information
Table 41. Dataitems Used With FRU Target
Data Item | Description |
|
|
productserialnumber | Lists the serial number field in the FRU product area for the location |
|
|
productrevision | Lists the revision field in the FRU product area for the location |
|
|
chassisall | Lists all chassis area FRU information for the location |
|
|
chassispartnumber | Lists the part number field in the FRU chassis area for the location |
|
|
chassisserialnumber | Lists the serial number field in the FRU chassis area for the location |
|
|
chassislocation | Lists the location field in the FRU chassis area for the location |
|
|
chassistype | Lists the type field in the FRU chassis area for the location |
|
|
listdataitems | Displays a list of all of the FRU dataitems that can be queried for the FRU target |
|
|
16.3Chassis FRU Validity Check
Chassis FRU validity is read on a periodic basis (every 24 hrs). A reuse/redefinition of two existing BIST FRU error messages in place when one or both of the Chassis FRU cannot be read. When the FRU (usually primary) cannot be read, and another message for when both primary and secondary cannot be read
"Primary FRU unreadable - using Secondary"
"FRU unreadable!"
These two error messages are now used if the chassis FRU is detected to be corrupt will be a SEL entry and an error message will go into /home/log/error.log
90 | Technical Product Specification |