
Intel® NetStructure™ ZT 7102 Chassis Management Module
Contents
|
| 6.7.3 | CMM Failover | 50 | |
| 6.8 | BIST Test Descriptions | 51 | ||
|
| 6.8.1 | Flash Checksum Test | 51 | |
|
| 6.8.2 | Base Memory Test | 51 | |
|
| 6.8.3 | Extended Memory Tests | 51 | |
|
|
| 6.8.3.1 | Walking Ones Test | 51 |
|
|
| 6.8.3.2 | 51 | |
|
|
| 6.8.3.3 | 51 | |
|
| 6.8.4 | FPGA Version Check | 52 | |
|
| 6.8.5 | DS1307 RTC Test | 52 | |
|
| 6.8.6 | NIC Presence/Local PCI Bus Test | 52 | |
|
| 6.8.7 | OS Image Checksum Test | 52 | |
|
| 6.8.8 | CRC32 Checksum | 52 | |
|
| 6.8.9 | IPMB Bus Busy/Not Ready Test | 52 | |
7.0 CMM Connection and Setup | 53 | ||||
| 7.1 | CLI Overview | 53 | ||
| 7.2 | Connecting to the CLI | 53 | ||
|
| 7.2.1 | Connecting through a Console | 53 | |
|
| 7.2.2 | Telnet into the CMM | 53 | |
|
| 7.2.3 | FTP Into the CMM | 54 | |
| 7.3 | Initial Setup - Logging in for the First Time | 54 | ||
|
| 7.3.1 | Setting IP Address Properties | 54 | |
|
|
| 7.3.1.1 Setting IP Information (IP Address, Netmask, and Gateway) | 55 | |
|
|
| 7.3.1.2 Setting Eth0 to DHCP | 55 | |
|
| 7.3.2 | Setting a Hostname | 56 | |
|
| 7.3.3 | Setting | 56 | |
|
| 7.3.4 | Rebooting the CMM | 56 | |
8.0 | Command Line Interface (CLI) Syntax and Arguments | 57 | |||
| 8.1 | cmmget and cmmset syntax | 57 | ||
| 8.2 | Help Parameter: | 57 | ||
| 8.3 | Location Parameter: | 57 | ||
| 8.4 | Target Parameter: | 58 | ||
| 8.5 | Dataitem Parameter: | 58 | ||
| 8.6 | Value Parameter: | 61 | ||
| 8.7 | Sample CLI Operations | 61 | ||
| 8.8 | Generating a System Status Report | 62 | ||
9.0 | Resetting the Password | 63 | |||
| 9.1 | Resetting the Password in a Single CMM System | 63 | ||
| 9.2 | Resetting the Password in a Dual CMM System | 63 | ||
10.0 | Sensor Types |
| 65 | ||
| 10.1 | 65 | |||
|
| 10.1.1 | 65 | ||
| 10.2 | Discrete Sensors | 65 | ||
|
| 10.2.1 | Discrete Sensor Events | 65 | |
11.0 | Health Event Strings | 67 | |||
| 11.1 | Syntax of Health Event Strings | 67 |
Technical Product Specification | 5 |