Intel® NetStructureTMZT 7102 Chassis Management Module

Command Line Interface (CLI) Syntax and Arguments

8.4Target Parameter: -t

The Target parameter is the sensor or variable that the cmmget or cmmset acts on. The Target keywords are shown in the following table.

Note: If the target is not specified, then it is assumed that Dataitem is an attribute of Location.

Table 22. Target (-t) Keywords

Keyword

Description

 

 

 

Used to query the FRU or individual FRU fields for a specific location. For more

fru

information on querying a component’s FRU and individual FRU fields, see Section 16.0,

 

“Obtaining FRU Information” on page 89.

 

 

SDR Sensors

The sensor name as defined in its Sensor Data Record (SDR) for that component. Sensor

names can be retrieved for an IPMI based location using the ListTargets Dataitem.

 

 

 

none

Same as not entering a target.

 

 

8.5Dataitem Parameter: -d

The Dataitem parameter is the Target or Location attribute that the user is getting or setting. Dataitem must be given for every CLI command. The Dataitem keywords are shown in the following table.

Table 23. dataitem (-d) Keywords for All Locations (Sheet 1 of 2)

Data Item

Description

Get/

Valid Set

Set

Values:

 

 

 

 

 

 

 

Used to configure user defined actions when events occur.

 

 

 

This dataitem is used with a target (–t) parameter specified

 

Valid filename

criticalaction

sensor and a value (-v) parameter. When an event

 

 

of a script that

majoraction

happens for that particular sensor, then the script defined

 

 

resides in

in the –v parameter will be executed. The script to be

Both

 

minoraction

 

executed must be located in the /home/scripts directory on

 

/home/scripts

 

 

normalaction

the CMM and the /home/scripts path should be omitted

 

none

 

when specifying the script. See Section 18.0, “CMM

 

 

 

 

 

Scripting” on page 93 for more information.

 

 

 

 

 

 

current

The current value of a sensor.

Get

N/A

 

 

 

 

health

Returns the health of the location and if any events exist.

Get

N/A

 

 

 

 

healthevents

Returns the specific health events that are occurring on

Get

N/A

the location if any exist.

 

 

 

 

 

 

 

listdataitems

Used to find the data items available on a location.

Get

N/A

The output lists dataitems that the location supports.

 

 

 

 

 

 

 

 

Used to find what sensors or targets are available on the

 

 

listtargets

location. This is the list of sensors defined by the SDR for

Get

N/A

 

that particular location.

 

 

 

 

 

 

 

Used to find out if a particular location is occupied or

 

 

presence

present in the chassis. This can be blades or intelligent fan

Get

N/A

 

trays.

 

 

 

 

 

 

sel

Returns a location's System Event Log.

Get

N/A

 

 

 

 

58

Technical Product Specification

Page 58
Image 58
Intel ZT 7102 manual Target Parameter -t, Dataitem Parameter -d, Target -t Keywords