2
Task 7: Configure Management Server Password and Network Addresses 2-29
Installation Tasks
Figure 2-22 LCD Panel (LAN 1 IP Address)
4. Use the arrow keys as described in step 2 to input a new IP
address, then press ENTER. The following message appears
(Figure 2-23):
Figure 2-23 LCD Panel (Save Change)
5. Press ENTER. The LAN 1 IP address changes and the following
message appears (Figure 2-24) with the default subnet mask of
255.0.0.0.
Figure 2-24 LCD Panel (LAN 1 Subnet Mask)
6. Use the arrow keys as described in step 2 to input a new subnet
mask, then press ENTER. The following message appears
(Figure 2-25):
Figure 2-25 LCD Panel (Save Change)
7. Press ENTER. A Wait a moment! message appears at the LCD
panel, the LCD panel returns to the LAN 1 Setting?? message,
and the LAN 1 subnet mask changes.
8. Record the public LAN IP address and subnet mask for reference
if the management server hard drive fails and must be restored.
Inp ut IP:
192.168.000.001
Sa ve C h ange?
Yes, Save !!
Input Netmask:
255.000.000.000
Sa ve C h ange?
Yes, Save !!