2
2-6 McDATA® Sphereon 3032 and 3232 Fabric Switches Installation and Service Manual
Installation Tasks
Task 15: Verify Switch-to-Management Server
Communication.
Optional 2-55
Task 16: Configure PFE Key (Optional).Optional - configure if a feature key is ordered by the
customer.
2-56
Task 17: Configure Management Server (Optional). Required if the management server is installed. 2-59
Task 18: Set Switch Date and Time. Optional 2-74
Task 19: Configure the Sphereon 3032/3232 Element
Manager Applications.
Required 2-76
Task 20: Configure Switch Operating Parameters Use to set parameters on the switch through the
Configure Switch Parameters dialog box.
2-78
Task 21: Configure Fabric Operating Parameters Use to set parameters on the switch through the
Configure Fabric Parameters dialog box.
2-81
Task 22: Configure Open Trunking Optional (only available if the Open Trunking feature
is installed).
2-102
Task 23: Test Remote Notification (Optional).Optional - perform this task to change default settings
or customize switch operation.
2-102
Task 24: Back Up Configuration Data. Required 2-103
Task 25: Configure the Switch from the SANpilot Interface
(Optional).
Optional 2-106
Task 26: Cable Fibre Channel Ports. Required 2-134
Task 27: Connect Switch to a Fabric Director (Optional).Optional - perform this task to connect the switch to a
fabric.
2-135
Task 28: Register with the McDATA File Center Required 2-137
Table 2-4 Installation Task Summary (continued)