3
3-108 McDATA® Sphereon 3032 and 3232 Fabric Switches Installation and Service Manual
Diagnostics
MAP 0800: Server Hardware Problem Determination
This MAP describes isolation of hardware-related problems with the
customer-supplied server communicating with the switch through
the SANpilot interface, EFC Server, or customer-supplied server
running the EFC Manager application.
The MAP provides high-level fault isolation instructions only. Refer
to the documentation provided with the server for detailed problem
determination and resolution.
To fault isolate software-related problems with the server, go to
MAP 0300: Console Application Problem Determination on page 3-36.
To fault isolate switch-to-server communication problems, go to
MAP 0400: Loss of Console Communication on page 3-46.
1
Are you performing fault isolation at a customer-supplied server
communicating with the switch through the SANpilot interface?
NO YES
↓The server and Internet browser application are not McDAT A-
supported and analysis for the failure is not described in this
MAP. Refer to the supporting documentation shipped with the
server for instructions on resolving the problem. Exit MAP.
2
Are you performing fault isolation at a customer-supplied, Unix-based
server running the client EFC Manager application?
NO YES
↓Unix-based servers are not McDATA-supported and analysis
for the failure is not described in this MAP. Refer to the
supporting documentation shipped with the server for
instructions on resolving the problem. Exit MAP.