McDATA 3032, 3232 - page 302

3
3-88 McDATA® Sphereon 3032 and 3232 Fabric Switches Installation and Service Manual
Diagnostics
e. At the third Fabric Binding dialog box, ensure the Fabric
Membership List is updated and correct for each switch, then
click Activate for each switch. The fabric binding feature is
consistently enabled for both switches.
Did updating the fabric membership lists solve the problem?
NO YES
↓The switch appears operational. Exit MAP.
Contact the next level of support. Exit MAP.
31
A port connection is not allowed because of a switch binding
mismatch. Switch membership lists must be compatible for both
fabric elements.
a. At the Hardware V iew for each switch, click Configure and select
Switch Binding and Edit Membership List. The Switch Binding -
Membership List dialog box displays.
Figure 3-42 Switch Binding - Membership List Dialog Box