2
Task 25: Configure the Switch from the SANpilot Interface (Optional) 2-123
Installation Tasks
Configure User
Rights Perform this procedure to configure the administrator-level and
operator-level passwords used to access the SANpilot interface
through the Enter Network Password dialog box. To configure
passwords:
1. At the Configure panel, click the Security tab. The Security page
displays with the User Rights tab selected (Figure 2-99 on
page 2-123).
Figure 2-99 Configure Panel (Security Page with User Rights Tab)
2. For the Administrator set of data fields:
a. Type the administrator user name (as specified by the
customer’s network administrator) in the New User Name
field. Use 16 alphanumeric characters or less.
b. Type the administrator password (as specified by the
customer’s network administrator) in the New Password field.
Use 16 alphanumeric characters or less.
c. Type the administrator password again in the Confirm New
Password field.
3. For the Operator set of data fields:
a. Type the operator user name (as specified by the customer’s
network administrator) in the New User Name field. Use 16
alphanumeric characters or less.