McDATA 3032, 3232 Configure and Enable Call-Home Event Notification

2-94 McDATA® Sphereon 3032 and 3232 Fabric Switches Installation and Service Manual

Installation Tasks

Figure 2-76 Configure Ethernet Events Dialog Box

3. Click the Enable Ethernet Events check box. A check mark appears

in the check box to indicate Ethernet events are enabled.

4. At the Ethernet Timeout field, type a value between 10 through 120

minutes.

5. Click OK to close the dialog box.

Configure and

Telephone numbers and other information for the call-home feature

are configured through the Windows 2000 dial-up networking

application. Refer to Task 11: Configure the Call-Home Feature (Optional)

for configuration instructions. Refer to Task 23: Test Remote Notification

(Optional) on page 2-102 for instructions on testing this notification

feature.

NOTE: The call-home feature may not be available if the EFC Management

applications (EFCM Lite) is installed on a customer-supplied platform.

1. Close the Hardware View and return to the Products View by

clicking close (X) at the upper right corner of the window.

2. Select Configure Call Home Event Notification from the Maintenance

menu. The Configure Call Home Event Notification dialog box

displays (Figure 2-77).

Figure 2-77 Configure Call Home Event Notification Dialog Box