McDATA 3032, 3232 Configure and Enable E-mail Notification

2-92 McDATA® Sphereon 3032 and 3232 Fabric Switches Installation and Service Manual

Installation Tasks

d. The default user datagram protocol (UDP) port number for

trap recipients is 162.

e. Type a decimal port number in the associated UDP Port

Number field to override the default.

2. To enable or disable transmission of authorization trap messages

to unauthorized management workstations trying to access

SNMP information through the management server, select the

Enable Authorization Traps check box. A check mark in the box

enables transmission.

3. Click Activate to save the information and close the dialog box.

Configure and

Perform this procedure to configure and enable e-mail addresses and

simple mail transfer protocol (SMTP) server addresses to receive

e-mail notification of switch (and other managed product) events.

The addresses must be configured at the SAN management

application, then enabled through the Element Manager application.

Refer to Task 23: Test Remote Notification (Optional) on page 2-102 for

instructions on testing this notification feature. To configure and

enable e-mail and SMTP server addresses:

1. Close the Hardware View and return to the Products View by

clicking close (X) at the upper right corner of the window.

2. Select Configure E-Mail from the Maintenance menu. The Configure

E-Mail dialog box displays (Figure 2-75).

Figure 2-75 Configure E-Mail Dialog Box