McDATA 3032, 3232 Task 10: Set Management Server Date and Time

2-44 McDATA® Sphereon 3032 and 3232 Fabric Switches Installation and Service Manual

Installation Tasks

Figure 2-44 EFCSERVER\srvacc Properties Dialog Box (Group Membership Tab)

3. Based on the level of access to be changed, select the Standard user,

Restricted user, or Other radio button. If the Other radio button is

selected, choose the type of access from the adjacent list box.

4. Click OK. The new user information is added and the

EFCSERVER\srvacc Properties dialog box closes. Record the user

information for reference if the management server hard drive

fails and must be restored.

5. If no other users are to be changed, click OK to close the Users and

Passwords dialog box.

6. Click close (X) at the upper right corner of the Control Panel

window to return to the Windows 2000 desktop.

Task 10: Set Management Server Date and Time

The SAN Management application’s audit and event logs are

stamped with the date and time from the management server. The

switch’s system clock is synchronized with date and time of the

management server by default. To set the server date and time:

1. At the Windows 2000 desktop, click Start, then select Settings,

then Control Panel. The Control Panel window displays.