Muratec F-360 manual Cursor Keys, Message report

Getting started

7	MENU — Any function can be started by first pressing this key and then enter-
	ing the function number.
8	TEL INDEX — Press	to display one-touchand speed-dial entries sorted
	alphanumerically, as in a telephone directory. (See page 3.8.)
9	ENTER — This key confirms user settings, begins operations, and moves
	through command levels.
10	Cursor Keys
	— Scrolls (moves) through features and command options as dis-
	played on the LCD.
11	CANCEL — Press to delete characters on the LCD and cancel commands you
	have entered into the machine.
12	REDIAL — Press	to redial the last number you dialed.
13	BACK — Press to go back to the previous step.
14	Select function keys — These keys correspond to the items at the lower
	part on the LCD. Press to choose item at the lower part on the LCD.
15	Liquid crystal display (LCD) — Shows the machine’s status and lets you
	see what you’re programming into the machine. The display shows 4 lines, 30
	characters per line. If the LCD is blank, the machine is off.
16	LCD contrast key — Press to adjust the contrast level of the LCD display.
17	MEMORY RECEIVE light — Glows when the machine is receiving an incoming
	fax document into its electronic memory.
18	COMM. light — Glows when the machine is communicating with another
	machine.
19	ALARM light — Glows when a problem occurs during fax communication,
	printing or scanning. The light stays on until the machine prints a Check

Message report.

20 22

Flip Tab A Flip Tab B Flip Tab C Flip Tab D

21

20 Macro Keys — Programming the Macro keys (M1, M2 and M3) can reduce many steps of the operation to a simple press of a key. You can “teach” the Macro keys to carry out one of the several operations (see pages 3.18–3.21).

21 Programmable One-touch Keys — The keys labeled 57 to 60 let you teach your machine an advanced multi-step function just once, and then recall the function at any time by pressing one of these keys.

22 One-touch Keys — The keys labeled 01-56offer one-touch dialing conve- nience.

1.4