Muratec F-360 manual Setting Sleep mode Energy saving mode, Setting paper source

Setting Sleep mode (Energy saving mode)

Default setting: On

Note: All LED lamps on the control panel will not be off, even when the machine is in the sleep mode.

If you want to change the Sleep mode to OFF, you can set it here.

1 Press MENU, 2, 1, 0, 5, ENTER. The LCD shows:

2 Using the cursor key, select the mode you want. Then press ENTER to save the setting.

Setting paper source

Default setting: 1st cassette: Fax/Copy, Bypass Tray: Fax/Copy

1 Press MENU, 2, 1, 0, 8, ENTER. The LCD shows:

2 Select the item you want to change the setting using the cursor key and then press ENTER. The LCD will show:

3 Select “Fax/Copy”, “Fax” or “Copy” as you want. Then press ENTER. “Fax/Copy”: Select this if you want to use the paper source you selected for

faxing, list (or report) printing and copying.

“Fax”: Select this if you want to use the paper source you selected for faxing and list (or report) printing.

“Copy”: Select this if you want to use the paper source you selected for copying only.

“Not Used”: Select this if you do not want to use the paper source you selected.

Changing the default settings

If you want to change another setting, repeat steps 2 and 3.

If you do not want to change any more settings, proceed to step 4.

4 Select “Exit” then press ENTER to save the setting.

Adjusting the machine’s clock

You can adjust the machine’s clock here.

1 Press MENU, 2, 1, 0, 7, ENTER. The LCD shows:

2 Use the numeric key to enter the current date and time to adjust the clock. Then press ENTER.

Setting 2-bin tray (Option)

Default setting: Copy exit: Lower tray, Fax exit: Upper tray, List exit: Upper tray

You will set where the printed paper emerges in this operation.

Note: This operation will appear only if the optional 2-bin tray has been attached to your machine.

1 Press MENU, 2, 1, 1, 0, ENTER. The LCD shows:

2	Select the item you want to change the setting by using the cursor key and
	then press ENTER.
3	Select “Upper” or “Lower” as you want. Then press ENTER.
	If you want to change another setting, repeat steps 2 and 3.
	If you do not want to change any more settings, proceed to step 4.
4	Select “Exit” then press ENTER to save the setting.

4.9