Muratec F-360 Invalid Protect Passcode, Memory Overflow, Keep These Pages?, No Command Stored

Just in case …
What you see on the LCD	What it means/What to do
Document Full	You tried to enter an document into an F-Code
	box or a Batch box, but the machine has reached
	its capacity. Delete documents stored in box until
	the machine will let you proceed.
Document Jam	An original document jam while you are using
	the ADF for either faxing or copying. See page
	5.1 for instructions on clearing the jam.
Document Stored	A received document was in your fax’s memory
	when you tried to turn off the security reception
	passcode. Print the received document from your
	fax’s memory, then retry the desired operation.
	. . . or . . .
	You tried to erase a Batch box which contains at
	least one document.
	Erase the document(s), then try again.

Drum Cartridge is Almost Empty Your drum will need to be replaced soon.

Please contact your authorized Muratec dealer to purchase a new drum cartridge if you don’t already have one.

Hang Up Phone	The optional handset is off-hook.
	Hang it up, making sure the upper part of the
	handset presses down on the “hook” button.
In Relay Box	You tried to store a document for polling in an
	F-Code box which is set to be a relay box.
	Select an F-Code box which is set to be a bulletin
	box, then try again.
In Secure Box	You tried to store a document for polling in an
	F-Code box which is set to be a security box.
	Select an F-Code box which is set to be a bulletin
	box, then try again.
Invalid I.D. Code	The F-Code box I.D. code you entered isn’t valid.
	Try re-entering your F-Code box I.D. code.
Invalid Number	You pressed a key which has no function during
	the current operation.

What you see on the LCD	What it means/What to do
Invalid Protect Passcode	The protection passcode you entered isn’t valid.
	Repeat the operation, entering the correct protec-
	tion passcode.
Memory Overflow	During transmission (or copying), you tried to
Keep These Pages?	enter more pages into memory than your fax
	could store. Press [YES] to tell your fax to keep as
	many pages in memory as possible, or press [NO]
	to delete from memory all pages stored during
	this operation (but not previous operations).
No Command Stored	You pressed COMM.CANCEL/CONFIRM to review
	upcoming commands, but your fax machine had
	none stored.
No Department Code	You tried to turn on the department code setting
	but there are no department codes stored in
	your fax machine. Store at least one department
	code, then try again.
	. . . or . . .
	You entered incorrect department code at fax
	sending while the department feature is on.
	Enter correct department code.
No Document Stored	You tried to print a document from memory, but
	your fax machine had none stored.
No Drum Unit	The drum unit is missing or has not been prop-
	erly installed in your fax machine.
	Please properly install the drum unit.
No Number Stored	You selected an autodialer, batch box or F-Code
	box number for which there is no fax (or phone)
	number programmed. Either choose another
	number or dial a phone number directly from the
	numeric keypad.
No Protect Passcode	You tried to program a security feature (see
	page 3.46), but there’s no protection passcode
	stored in your fax machine. Store a protection
	passcode in your machine, then retry again.

5.6