Muratec F-360 manual Printing a list of speed-dial numbers, Fax dialing via speed-dial

Press SPEED DIAL/GROUP once. The LCD shows:

4 Press [Yes] to erase the number.

To erase another one-touch number, repeat steps 2–4. Or press STOP to return to standby mode.

Printing a list of speed-dial numbers

You can easily print a list of your speed-dial numbers. The list includes each number’s three-digit identifier, the Location ID (if any) and fax/telephone number you’ve stored for that speed-dial number.

To print a list of speed-dial numbers, press MENU, 5, 1, 0, 6, ENTER.

Fax dialing via speed-dial

To dial a fax call using a speed-dial number:

1 Place the document in the ADF.

2 Adjust resolution and contrast if necessary.

3

4 Use the numeric keypad to enter the three-digit identifier (such as 018, in this example) for the speed-dial number you want to dial. The LCD shows the Location ID (or fax number) you stored:

5 Press START.

Advanced features

What happens next depends on whether you specified memory transmission or real time transmission:

If you specified quick memory transmission:

•Your fax machine scans the first page of your document into memory, then dials the other fax machine.

•While dialing, your machine scans the other documents into memory.

•The LCD shows the Location ID and the document’s width and resolution settings: Note: If the entry doesn’t have a Location ID, the number appears.

•When the other machine answers, your fax transmits the scanned document directly from memory. (To review Quick memory transmission, see page 2.2.)

If you specified normal memory transmission:

•Your fax machine scans your entire document into memory, then dials the other fax machine.

•The LCD shows the Location ID and the document’s width and resolution settings: Note: If the speed-dial entry doesn’t have a Location ID, the number appears.

•When the other machine answers, your fax will transmit the document directly from memory. (To review Memory transmission, see page 2.2.)

If you specified real time transmission:

•Your fax machine dials the other fax machine.

•The LCD shows the Location ID and the document’s width and resolution settings: Note: If the speed-dial number doesn’t have a Location ID, the number appears.

•When the other machine answers, your fax feeds the document through its scan- ner, transmitting as it goes. (To review the Real time transmission, see page 2.3)

Phoning via speed-dial

To dial a phone call using a speed-dial number, you must have an optional handset attached to your machine. To make the call:

1 Obtain a dial tone by doing one of the following:

•Lift the handset

•Press MONITOR/CALL to use the monitor speaker

2 Press SPEED DIAL/GROUP once. The LCD shows:

3.5