Example 2: To program the operations for printing the one-touch numbers
list: Press MENU, 5, 1, 0, 5, ENTER.
6 If you programmed ENTER or START into the operation, proceed to step 7. Otherwise, press MACRO PROGRAM and skip to step 8.
7 If you want to start immediately after pressing the Macro key when you use it, press [Yes]. If not, press [No].

4 The LCD shows:

If you want to overwrite the operation already programmed, press [Yes]. If you want to overwrite only the job’s name, press [No] and go to step 8. If you do not want to overwrite the key you have choice, press STOP.

5 Press the keys exactly as you operate the job you want to program into the Macro key.

Note: It keeps beeping during the job registration in order to make notice of the registration mode.

Note: You can program up to 60 steps. When it comes over 60 steps, your fax machine asks if you want to register the operations you have entered. If you want to register them, press ENTER. If not, press STOP.

Note: If you want to cancel the operations you have set, press MACRO PROGRAM, STOP and then go back to step 1.

Example 1: To program some operations for copy: Press COPY to change to the copy mode, and set number of the copies, contrast, resolution and reduction rate as you want.

Note: See “Making copies” (pages 2.10–2.11) for detail operations.

Note: If you want to confirm the settings or operations in the Macro key before you start it, press [No] here.

Advanced features

8 The LCD now shows:

 

The machine now asks you to enter the title of this job.

 

If you do not want to enter or change it, skip to step 10.

9

Enter the title by using the numeric keypad. (If necessary, review “Entering

 

characters”, page 1.12) It may be up to 130 characters in length.

10

Press ENTER to save the setting.

Changing the title of the Macro key

When you want to change only the title of a Macro key:

1 Press MACRO PROGRAM. The LCD shows:

2 Select “Change title” using the cursor key and press ENTER. The LCD shows:

3

Press the Macro key (M1, M2 or M3) you want to change. Then press ENTER.

 

The LCD shows:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4

Enter the new title by using the numeric keypad. (If necessary, review

 

“Entering characters”, page 1.12)

5

Press ENTER to save the setting.

3.19

Page 66
Image 66
Muratec F-360 manual Changing the title of the Macro key