Muratec F-360 No Report, No Toner Cartridge, Not Allowed in Macro, Open Top Cover, Please Wait

What you see on the LCD	What it means/What to do
No Report	You requested an activity journal or confirma-
	tion report, but your fax machine has no record
	of any fax jobs having occurred.
No Toner Cartridge	The toner cartridge is missing or has not been
	properly installed in your fax machine. Please
	properly install the toner cartridge.
Not Allowed in Macro	During macro registration, you pressed the key
	which cannot be registered in Macro, such as
	Monitor/Call key or Security Reception key.
Open Top Cover	The paper is jammed in your fax machine.
Please Remove Paper	Open the cover indicated on the LCD, and
Open 1st Side Cover	remove the jammed paper carefully.
Please Remove Paper
Open 2nd Side Cover
Please Remove Paper
Open Top/2-Bin Cover
Please Remove Paper
Remove Bypass Paper
Open&Close Top Cover
PIN is not Stored	You selected “Mode1” in the PIN mask feature
	and tried to call an autodialer number in which
	no PIN has been entered, or to call using
	numeric keypad without PIN. Enter a PIN, then
	try again.
Please Call Service	The printer unit of your fax machine has become
	inoperable. Call your authorized Muratec dealer
	or Muratec Customer Support.
Please Wait	Your fax machine’s printer is either warming up
	or busy. Please wait until the fax is finished
	printing and then re-try your command or opera-
	tion.
Printer in Use	The command you’re trying to enter requires the
	use of the printer, which is already in use. Wait
	for the fax to finish printing, then try again.

	Just in case …
What you see on the LCD	What it means/What to do
Replace Drum : Unable to Print Your drum cartridge doesn’t work.
	Your machine cannot print until it is replaced
	with a new drum cartridge.
	Replace it.
Replace Toner : Unable to Print	Your toner cartridge is empty.
	Replace the toner cartridge. Your machine cannot
	print until it is replaced with a new toner car-
	tridge.
Scanner in Use	The command you’re trying to enter requires the
	use of the scanner, which is already in use. Wait
	for the fax to complete the scan, then re-try the
	desired command.
Security Rx is Off	You tried to turn the security reception ON using
	a Soft key which is assigned to set the security
	reception to ON or OFF, but security reception
	setting has not set to on.
	To turn on or off the security reception using a
	Soft key, first set the security reception setting to
	on. (See pages 3.46–3.47.)
Select Group Number (0-32)	You tried to enter a call group number greater
	than 32. Your machine can maintain 32 call
	groups, numbered 1-32 (call group 0 covers all
	the groups). Determine the correct call group
	identifier number and enter it, instead.
Toner Almost Empty	Your machine is almost out of toner.
	Please contact your authorized Muratec dealer
	soon to purchase a new toner cartridge if you
	don’t already have one.
Too Many Characters	You attempted to enter too many numbers or
	other characters in the current operation.
	Press CANCEL to delete the extra characters, then
	try again. You may wish to review the operation’s
	appropriate instructions.
Too Many Steps	You tried to enter too many steps for a macro.
	You can enter up to 60 steps into a macro key.

5.7