Muratec F-360 manual Programming regular polling, Programming an F-Code transmission

Follow steps 1–6 on pages 3.38–3.39.

Select “Polling” and press ENTER. The LCD shows:

Select ON using the cursor key. Then press ENTER.

9	Press ENTER.
	If you select ON, proceed to step 10.
	If you select OFF, skip to step 13.
10	Using the cursor key, select the setting you want to specify for this program-
	mable one-touch number. Then press ENTER.
11	Using the cursor key, select the mode you want. Then press ENTER.
	If you want to make another setting, repeat step 11 and 12.
	Note: Choose “-----” if you do not want to specify for this programmable one-
	touch key.
12	Select “Exit” and press ENTER.
13	Press STOP to return your machine to standby mode.

Programming regular polling

To program a regular polling operation into a programmable one-touch key:

1

2

3

4 If you want the polling to begin immediately every time you press the key, proceed to step 5.

If you want to delay the polling, follow steps 7–9 on page 3.39.

5 If you want to make additional settings for this programmable one-touch number, select it now. (Regarding the operation for programming it, see each page.)

Otherwise, proceed to step 6.

6 Select “Exit” and press ENTER.

7 Press STOP to return your machine to standby mode.

Advanced features

Programming an F-Code transmission

For this operation to work, two things must be true:

•You must know how the remote fax is using each F-Code box to which you’re transmitting — for example, as a security box or a relay box. Different fax manu- facturers may use slightly different terms, but the concepts are the same.

•You must know the remote fax’s ITU-Tsub-address and password for each box to which you want to transmit.

To program an F-Code transmission into a programmable one-touch key:

1 Follow steps 1–6 on pages 3.39.

2 Select “F-Code Transmit” and press ENTER. The LCD shows:

3 Use the numeric keypad to enter the ITU-Tsub-address for the box to which you want to send the document.

4 Press ENTER. The LCD shows:

	Note: If there isn’t a password for this box, press ENTER, then skip to step 6.
5	Use the numeric keypad to enter the appropriate ITU-Tpassword for the box.
	Then press ENTER.
6	If you want the transmission to begin immediately every time you press the
	key, proceed to step 7.
	If you want to delay the transmission, follow steps 7–9 on page 3.39.
7	Select “Exit” and press ENTER.
	The LCD asks if you want to make option settings which includes; resolution,
	contrast, memory transmission, report, cover page and Fax & Copy. If you
	want to make any of these settings, select ON using the cursor key.
8	Press ENTER.
	If you select ON, proceed to step 9.
	If you select OFF, skip to step 12.
9	Using the cursor key, select the setting you want to specify for this program-
	mable one-touch number. Then press ENTER.

3.41